Méthode d'entretien de la balle de marche de l'eau gonflable

1. Pour que votre appareil atteigne sa durée de vie normale, the gonflable water walking ball's internal load is 150 kg. Avant d'ouvrir et de fermer la fermeture éclair, tirez le curseur dans le sens des dents de la fermeture éclair. La vitesse d'ouverture et de fermeture de la fermeture à glissière doit être contrôlée dans 10-15 meters / minute. Do not open and close repeatedly for a long time. After the zipper is used and cleaned, it should be on the zipper teeth. Apply a layer of beeswax film. The beeswax can only be applied to the outer teeth, not the inner teeth. When not working, the zipper should be opened and waxed in a cool place.

2. When tourists play, do not allow tourists to scribble on the device with hard objects to avoid damage.

3. The equipment is damaged. It can be treated with treated water and then glued on the damaged area and on the repair skin. After the glue is applied for 5 minutes, it will not stick to your hands, and then the gonflable water walking ball will be warmed and bonded. It will be squeezed for several minutes and can be used.

4. In case of wind, rain, snow, fog, hail and other weather, the equipment should be strictly prohibited to avoid accidents.

5. For cleaning treatment, you can use washing powder to remove the stains and oil stains, then wipe them with water and dry the gonflable water walking ball.

6. To fold the device, fold along the zipper to avoid breaking the zipper.

7. If not in use the gonflable water walking ball for a long time, fold, bundle and clean the clean equipment.

ENQUÊTE MAINTENANT