7. A safety rope must be attached to each надувной мяч для ходьбы по воде. Операторам следует внимательно относиться к условиям на объекте.. Когда обнаружена аномалия, use the safety rope or other methods to quickly pull the надувной мяч для ходьбы по воде and people to the shore to ensure personnel safety.

8. Inflation method: Use a fan to inflate it from the zipper opening, but pay attention to inflating it to avoid overfilling, so as to avoid burst damage caused by overfilling.

9. When the outdoor air temperature is higher than 28 ℃, the sphere will expand due to the high temperature. In order to avoid the sphere expanding and cracking, please reduce the amount of gas when flushing.

10. Be sure to fasten the safety rope to the two round rope buckles next to the ball zipper. Do not tie the rope to the grip, as the pulling force of the rope will pull the надувной мяч для ходьбы по воде off (this condition is not covered by the warranty)

11. The zipper should be opened and closed in parallel along the seam, and avoid sand or other foreign objects being inserted to avoid damage to the zipper. Applying wax or soap to the chain to extend the life of the zipper.

Note: Be sure to use the special lubricant for the zipper for the first time, and the zipper cannot be pulled to the lowest position every time you use the надувной мяч для ходьбы по воде (at least 2CM, on the red warning bar).

12. Sealed zippers are consumables and have a limited number of uses, and all zippers need to be regularly lubricated and properly maintained.