Maintenance Method of Inflatable Water Walking Ball

1. In order for your device to reach its normal useful life, the Te mau mana'o tauturu no te water walking ball's internal load is 150 kg. Before opening and closing the zipper, pull the slider along the direction of the zipper teeth. The zipper opening and closing speed should be controlled within 10-15 meters / minute. Do not open and close repeatedly for a long time. After the zipper is used and cleaned, it should be on the zipper teeth. Apply a layer of beeswax film. The beeswax can only be applied to the outer teeth, not the inner teeth. When not working, the zipper should be opened and waxed in a cool place.

2. When tourists play, do not allow tourists to scribble on the device with hard objects to avoid damage.

3. The equipment is damaged. It can be treated with treated water and then glued on the damaged area and on the repair skin. After the glue is applied for 5 minutes, it will not stick to your hands, and then the Te mau mana'o tauturu no te water walking ball will be warmed and bonded. It will be squeezed for several minutes and can be used.

4. In case of wind, rain, snow, fog, hail and other weather, the equipment should be strictly prohibited to avoid accidents.

5. For cleaning treatment, you can use washing powder to remove the stains and oil stains, then wipe them with water and dry the Te mau mana'o tauturu no te water walking ball.

6. To fold the device, fold along the zipper to avoid breaking the zipper.

7. If not in use the Te mau mana'o tauturu no te water walking ball for a long time, fold, bundle and clean the clean equipment.

UIRAA I TEIE NEI